Certification: UL and CUL Listed
(IP67 Waterproof Under Pressure) CSA

Superior Features

This Fluorescent Machine Tool fixture is one of the finest, if not THE FINEST, and the most duable fixture offered in the industrial market today. The basis of its durability is its 1-3/4" diameter, shatter-proof (GE) Lexan casing. The superior design uses a 4100 degree Kelvin bulb and defusing reflector to produce an exceptionally bright white light. In the case of the 11" fixture (The Sawfish), this virtually unbreakable casing is complemented with a rough service bulb. The rough service bulb alone is ten times more impact resestant. This fixture is designed for, and is an excellent selection for the most brutal and rugged machine type (i.e. 1600 ton presses, EDM, screw machines, etc.). The unsurpassed and unique combination of rugged durability, technical performance, product versatility is of exceptional quality. This fixture is a result of impeccable technicla detailing at each component level coupled with the highest degree of component quality. Each fixture is made by hand with gread care in the United States. This assures maximum reliability. It is UL and CUL Listed.

GE's Lexan Outer Casing

The 1-3/4"diameter (2"at widest point) Lexan outer casing is virtually unbreadkable even in the most hostile and the roughest industrial environments. It is resilient and extremely versatile in extreme vibration and moist/wet conditions. The PVC (poly vinyl chloride) end caps serve as impact protection. The O-rings, molded into the end cap, offer a moisture resestant fixture. All electrical components are UL approved and the superior design places the components inside a closed water-resistant chamber to insure the operator's safety. The temperature tolerance is approximately 5 degrees Fahrenheit to 140 degrees Fahrenheit (temperature is fixture dependent). The fixture draws .2 to .6 amps.

External Ballast

On each of the 110 volt versions of this remarkable machine fixture, the ballast is external to the fixture and placed on the cord. This allows the fixture and light source to be placed into rugged and hostile machining and industrial environments while protecting the expensive ballast in a safe, dry location. This design detailing adds to the reliability of this fixture - even in the toughest of machine and industrial environments. The ballast is encased for easy serviceability or cord adjustment.

Specifically Tailored Reflectors Offer a Pure White Light

Our specially tailored reflectors offer a pure white light unlike most industrial fluorescent fixtures that cast off traditional colors. This eliminates artificial shadowing in the work area. The reflector directs light while shielding the operator's eyes.

Oil Resistant Cords

The standard 6-foot or 25-foot cable (noted as the last number of the Part Number) uses SJTOW-A industrial oil-resistant - all weather cable. THe 16 gauge copper/ 3 conductor cable remains flexible even in cold weather. Our standard cable is UL, CUL and CSA approved. The grounded 120 volt plug offers an added degree of safety and meets OSHA requirements: A magnetic cord holder comes standard with each fixture to position the cording free and away from tooling or entanglements.

Auto-Start Offers Immediate Light

The standard auto-start feature offers immediate light quality upon plugging in or turning on the fixture.

Water-Resistant End Caps

O-rings are molded into the end caps to prevent water or industrial coolants/solutions from entering the light chamber.

Ultra-Violet Inhibitors

The ultra-violet inhibitors are molded into the two end caps and outer tube to increase component life and eliminate yellowing of the Lexan casing. This protects the Lexan casing from coloring over time. The end result is an exceptionally bright white light that won't yellow.

Lighting Options

Halogen Lighting Products Corporation is always happy to custom tailor this superior fluorescent fixture to your specific machine or industrial application. Keeping to our commitment to offer EXCELLENCE in product quality at low prices, our custom tailored fixtures are not much more cost, if any, than our standard fixtures. Following are combinations of options to consider in tailoring a fixture to your machine applications:

Standard Bulb Found Worldwide

Our fixtures are designed to use standard off-the-shelf bulbs that can be found inexpensively and easily anywhere in the world. In the case of the 11" fixture (The Sawfish), the rough service bulbs incorporated in our fixtures make the bulbs ten times more impace resistant. The bulb always remains cool in use, assuring operator safety.

Mounting Brackets

Wide variety of mounting attachments are available. Fixture mounts directly to the machine tool or press without the need for special housing. Worker can use hands and arm freely. Holds fixture firmly in position for exact light positioning. Rugged magnet provides 30 times the required pull to support the light. Allows rotation to position light accurately. Two brackets are recommended.

* These hours can be compared to incandescent bulb generally rated at 1,000 hours.
Custom built fixture may be a little longer in length.All prices are U.S. Dollars. Prices subject to change without notice.